CROWN REMOVER

CR4566  
To open and remove the crown in a quick and easy way. Insert the serrated tips in the line (previously made with a bur) and operate the lever.

CRP  
Automatic Crown Remover is attached through the tip to the crown needing to be removed.It is a spring loaded mechanical device to remove the bonded crowns and bridges by an intensive impulse of the impact stress caused by the stored energy in the spring located inside the instrument. cement layer breaks with the impulse and the crown can removed easily.

CRS  
Automatic Crown Remover is attached through the tip to the crown needing to be removed.It is a spring loaded mechanical device to remove the bonded crowns and bridges by an intensive impulse of the impact stress caused by the stored energy in the spring located inside the instrument. cement layer breaks with the impulse and the crown can removed easily.

CR1  
This Crown Remover Tip (CR1) is attached to the crown remover guns to remove the single crown.

CR10  
CR10 works as a adjustment wrench to open end of crown remover gun.

CR2  
This Bifid Crown Remover Tip (CR2) is attached to the crown remover guns to remove the crowns.

CR3  
This Sickle Crown Remover Tip (CR3) is attached to the crown remover guns to remove the crowns and bridges.

CR4  
This Contra Angle Crown Remover Tip (CR4) is attached to the crown remover guns to remove the single crown.

CR5  
This Inverted Curved Crown Remover Tip (CR5) is attached to the crown remover guns to remove the single crown.

CR6  
This Straight Crown Remover Tip (CR6) is attached to the crown remover guns to remove the single crown.

CR7  
This Flexi-Wire set (CR7) is attached to the crown remover{standard} guns to remove the bridge.

CR8  
This Wire set with lock (CR8) is attached to the crown remover {Premium} guns to remove the bridge.

CR9  
CR9 is a key used for the adjustment of tip on crown remover gun.

CRMP  
MANUAL Crown Remover has a slide hammer that attached to the crown needing to be removed, transmits an impact force to the crown without striking the object itself. Tips can be mounted on both sides of the crown remover

CRMP1  
This Elbow hook tip of manual pattern crown remover is used to reach difficult  areas while removing crown.

CRMP2  
This Straight tip of manual pattern crown remover (CRMP2) is used to remove crown.

CRMP3  
This Serrated  tip of manual pattern crown remover (CRMP3) is used to remove crown.

CR4562  
Universal plier with positioning screw and internal spring for the removal of ceramic crowns and bridges. For a better grip, tip of pliers can be enhanced with rubber packing and emery powder.

CRT  
• AUTOMATIC Crown Remover: attached through the tip to the crown needing to be removed

CRT1  
It is attached through the tip to the crown needed to be removed. It transmits an impact force to the crown without striking the object itself.

CRT2  
It is attached through the tip to the crown needed to be removed. It transmits an impact force to the crown without striking the object itself.

CRT3  
It is attached through the tip to the crown needed to be removed. It transmits an impact force to the crown without striking the object itself.

CRT4  
It is attached through the tip to the crown needed to be removed. It transmits an impact force to the crown without striking the object itself.

CRT5  
It is attached through the tip to the crown needed to be removed. It transmits an impact force to the crown without striking the object itself.

CRT6  
It is attached through the tip to the crown needed to be removed. It transmits an impact force to the crown without striking the object itself.

CRT8  
It is attached through the tip to the crown needed to be removed. It transmits an impact force to the crown without striking the object itself.

CRT9  
It is attached through the tip to the crown needed to be removed. It transmits an impact force to the crown without striking the object itself.