D-Tech Compomax Restorative Kit

D-Tech Compomax Restorative Kit

Dtech Compomax is a light-curing Nano Hybrid Composite designed for anterior and posterior filling of all cavity classes. This resin-based dental restorative material offers enhanced color stability, specifically formulated to accommodate the 'Multi-shade layering' technique. This innovative approach ensures a natural and highly aesthetic filling while minimizing polymerization shrinkage. Compomax is applied with a dentine enamel bond and is conveniently available in a syringe for efficient use. 

INDICATION FOR USE:-

• Enamel layer for class I, II, III, IV, V, VI, restorations
• Repairing veneers
• Splinting & locking of periodontally involved teeth. Core build-up to replace missing tooth structure.
• Composite inlays
• Facetting of discolored anterior.
• Reconstruction of traumatically damaged anterior.
• Composite & porcelain repairs.
• Diastema closures.
• To mask out the discolored pulpal floor at the base of a preparation (opaque shades).

CONTRAINDICATIONS 
The application of Compomax is contraindicated if drainage or the recommended application technique cannot be achieved. Do not apply directly on open pulp or if there are any known allergies against one of the components

Features :

• High compressive strength
• High flexural strength
• Low shrinkage
• Easy to sculpt
• Does not stick to instrument

Specifications :

• Shelf life :- 2 years
• Polymer-based restorative materials

STORAGE 
Do not store above 25 C. Discharge syringes immediately after use to avoid the material curing from ambient light.  Do not use it after the expiry date.

Packaging :

• 4 x 4g Light Cured Universal Composite Syringe
• 1 x 2.5g Etching gel syringe
• 1 x 5ml Single step 5th generation bonding agent
• 50 x Fibred Applicator tips
• 20 x Angled tips

Direction to Use :

• Prior to preparation, clean the tooth, and remove all cleaning residues with a water spray. Determine the vita tooth shade. Use a rubber dam where possible.
• Prepare the cavity according to the general rules of adhesive technology. Round off enamel edges and protect pulp areas.
• Etch as required, according to your preferred technique, e.g. etch plus. Follow the instructions for using the materials used.
• Apply bond primer. (AQ Bond)
• Apply a lining of thin-flowing composite (compo Flow) or compomer as required. We recommend using a matrix.
• Fill the cavity in the required shade in layers of a maximum of 2 mm thickness. Light-cure each layer for 40 seconds.
• Surplus removal, contouring, and fine shaping are carried out e.g. With a diamond finisher and flexible discs of decreasing grain size. High-gloss polishing can be carried out with a 
  polishing paste using polishing cups/discs.